ct2k7
May 2, 08:10 PM
on a mission like this ... you bring the "Lab" with you
Unless the microgenetics machines are small, well, there are several stages in DNA transcription and reverse transcriptase, which would make several conditions unsuitable. Heat destroys it. It can be awfully slow. There are at least 6 stages using different equipment.
Unless the microgenetics machines are small, well, there are several stages in DNA transcription and reverse transcriptase, which would make several conditions unsuitable. Heat destroys it. It can be awfully slow. There are at least 6 stages using different equipment.
Zadillo
Oct 26, 10:59 PM
Works fine in Firefox 2.0 under XP for me, including composing a message (it opens up a new compose window and it works fine).
This is very nice, very slick. I like it!
This is very nice, very slick. I like it!
rhett7660
Apr 8, 08:55 AM
The fact that congress cannot construct a budget is simply a failure of them to perform their duties. Part of the reason is that the motivation to avoid a shutdown isn't great enough, thus I propose a two-fold solution to motivate them a little
1) Congress persons do not get paid during the shutdown. Perhaps if they were to not get paid they would be more motivated.
2) In the event of a shutdown all members of congress immediately become ineligible to run for re-election for their current position and ineligible to run in any other federal election. Since a shutdown means they've failed, they shouldn't be allowed to continue.
I would need to find a cite, but this was actually brought up and was put to vote in one of the houses. Of course it was struck down. I want to say this happened around the last time the government shut down under Clinton.
This has also happened at the state level (here in California anyway) and of course they were still getting paid while they, the Government, continued to work on something they should have done. Amazing, if you or I don't get the job done, we are out of a job.
I agree with another poster. Vote of no confidence on all and have a special election to get them all out of office. Ughhh. Very frustrated right now.
1) Congress persons do not get paid during the shutdown. Perhaps if they were to not get paid they would be more motivated.
2) In the event of a shutdown all members of congress immediately become ineligible to run for re-election for their current position and ineligible to run in any other federal election. Since a shutdown means they've failed, they shouldn't be allowed to continue.
I would need to find a cite, but this was actually brought up and was put to vote in one of the houses. Of course it was struck down. I want to say this happened around the last time the government shut down under Clinton.
This has also happened at the state level (here in California anyway) and of course they were still getting paid while they, the Government, continued to work on something they should have done. Amazing, if you or I don't get the job done, we are out of a job.
I agree with another poster. Vote of no confidence on all and have a special election to get them all out of office. Ughhh. Very frustrated right now.
Consultant
May 5, 10:33 AM
The microsoft usability tax costs even more, in wasted time and low productivity.
more...
kingdonk
Feb 28, 07:26 PM
Randome shots after they have all somehow gotten mixed up, if you want to know what one it belongs to just hover your mouse over the image and find another image with the same name/time.
63dot
Apr 2, 04:56 AM
I paid $4.19 for the cheap stuff but I didn't see the prices posted anywhere.
Heck, what can you expect from a small rural town with few signs for anything? But I expected something above four bucks and on its way to $4.50 a gallon for regular unleaded.
Heck, what can you expect from a small rural town with few signs for anything? But I expected something above four bucks and on its way to $4.50 a gallon for regular unleaded.
more...
anonymous6237
Mar 11, 09:04 AM
We are 12th and 13th at Willow Bend. We are currently at the end of the line. There is a roped off area and they are saying LIMIT TWO PER PERSON.
Thanks for the Willow Bend update. I'm planning on heading over around 1:30 and hope to not be too far back in line.
Thanks for the Willow Bend update. I'm planning on heading over around 1:30 and hope to not be too far back in line.
Jolly Giant
Apr 12, 08:14 AM
but how would one run Casper when restoring the Windows partition?
since i'm not allowing any M$ crapola near my Macs, i have to admit i never tried it myself.
however, it would seem the app has worked for some. there are additional options available. click here (http://discussions.apple.com/search.jspa?objID=c237&search=Go&q=casper) for information :D
since i'm not allowing any M$ crapola near my Macs, i have to admit i never tried it myself.
however, it would seem the app has worked for some. there are additional options available. click here (http://discussions.apple.com/search.jspa?objID=c237&search=Go&q=casper) for information :D
more...
WestonHarvey1
Apr 12, 02:19 PM
Lucky for you, you got to help finance the mess that is the University system :)
By the end of this year I will have paid the final payment on my loans... I can't believe it's been 15 years! Worst investment I ever made.
Seriously, one of the most eye-opening things when I entered college was learning that I did *not* possess a liberal, open-minded view of race relations. I grew up in a white neighborhood, with nice liberal white teachers, always telling us how we are all equal. I always admired Martin Luther King, Jr.'s speeches when I heard them.
I thought that was the prevailing view until I got to college. I was so naive I wanted to run up to the first black guy I saw, give him a hug, and tell him I understand. Ha, not really, but you know what I mean. Guilty white liberal kid. I was stunned by the violent reaction I got before I'd ever opened my mouth.
Wow. The whole thing was just turned on its head. Nobody talked about true equality as a goal - it was all about power, grievance, reparations... and everything I learned just sounded shockingly racist. I was told that was just how whites see things. Rookie mistake!
By the end of this year I will have paid the final payment on my loans... I can't believe it's been 15 years! Worst investment I ever made.
Seriously, one of the most eye-opening things when I entered college was learning that I did *not* possess a liberal, open-minded view of race relations. I grew up in a white neighborhood, with nice liberal white teachers, always telling us how we are all equal. I always admired Martin Luther King, Jr.'s speeches when I heard them.
I thought that was the prevailing view until I got to college. I was so naive I wanted to run up to the first black guy I saw, give him a hug, and tell him I understand. Ha, not really, but you know what I mean. Guilty white liberal kid. I was stunned by the violent reaction I got before I'd ever opened my mouth.
Wow. The whole thing was just turned on its head. Nobody talked about true equality as a goal - it was all about power, grievance, reparations... and everything I learned just sounded shockingly racist. I was told that was just how whites see things. Rookie mistake!
heisetax
Sep 21, 10:22 PM
Not everyone will want to install BOTH updates.
Mine only wanted the Mac Pro EFI Firmware Update. It said that th Mac Pro SMC Firmware update was unneeded.
Bill the TaxMan
Mine only wanted the Mac Pro EFI Firmware Update. It said that th Mac Pro SMC Firmware update was unneeded.
Bill the TaxMan
more...
ct2k7
May 2, 08:10 PM
on a mission like this ... you bring the "Lab" with you
Unless the microgenetics machines are small, well, there are several stages in DNA transcription and reverse transcriptase, which would make several conditions unsuitable. Heat destroys it. It can be awfully slow. There are at least 6 stages using different equipment.
Unless the microgenetics machines are small, well, there are several stages in DNA transcription and reverse transcriptase, which would make several conditions unsuitable. Heat destroys it. It can be awfully slow. There are at least 6 stages using different equipment.
HeavenlyYeti
Mar 21, 07:25 PM
echoing the other guy, mixing is well done. I'd try to add more bass into it, though.
And the singing needs to be more dynamic, alive-feeling. Keep at it!:apple:
And the singing needs to be more dynamic, alive-feeling. Keep at it!:apple:
more...
Full of Win
Nov 6, 05:09 AM
I'm waiting for the Mark of the Beast = RFID comments to begin.
Serious, there are several segments of the population out there that have objections to this type of technology. I don't know if Apple cares though.
Serious, there are several segments of the population out there that have objections to this type of technology. I don't know if Apple cares though.
motech
Mar 1, 01:20 PM
is the address book / calendar server working?
if so how do i set it up?
i enabled them in the server app,
but when i goto my address book and enter in the user name and password and ip address it doesn't work.
i must be missing a step.
if so how do i set it up?
i enabled them in the server app,
but when i goto my address book and enter in the user name and password and ip address it doesn't work.
i must be missing a step.
more...
fromoxwithlove
Mar 13, 04:55 PM
Wirelessly posted (Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_2_1 like Mac OS X; en-us) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8C148 Safari/6533.18.5)
Get rid of DST. Not needed anymore. Problem solved.
Steve?
Is that you ??
Thought you were on medical leave.
LOL!
Get rid of DST. Not needed anymore. Problem solved.
Steve?
Is that you ??
Thought you were on medical leave.
LOL!
mdelvecchio
Apr 19, 11:18 AM
Anything beats the embarrassment that Apple has in the current iOS.
how do you mean, specifically? neither me, my gf, or my dad have ever had an opportunity to bemoan this functionality. how does it impair our ability or cause us embarrassment?
how do you mean, specifically? neither me, my gf, or my dad have ever had an opportunity to bemoan this functionality. how does it impair our ability or cause us embarrassment?
more...
CaoCao
Apr 6, 01:06 PM
Oh, dream time?
I support a return to paying a $1 per annum honorarium to political office holders. :rolleyes:
It would encourage efficiency massively
I support a return to paying a $1 per annum honorarium to political office holders. :rolleyes:
It would encourage efficiency massively
gugy
Sep 27, 07:08 PM
My friend had nothing but problems with his G5. The computer was constantly in for repairs and would spew out kernal-panics often. It ended up being a bad memory module, which was undetectable even with an extensive hardware test. The only reason he figure it out, is because he had lowned the additional RAM to a mutual friend while his G5 was in the shop for the last time.
<]=)
Yes, that might be it. It is the only thing that hasn't been replaced. The Apple memory has been replaced but not the third party RAM, I'll exchange for a new ones.
Thanks for the input.
<]=)
Yes, that might be it. It is the only thing that hasn't been replaced. The Apple memory has been replaced but not the third party RAM, I'll exchange for a new ones.
Thanks for the input.
snberk103
Mar 19, 04:59 PM
Auto is a good place to start, but DON'T BE AFRAID to use full manual 'M'. I have never shoot anything other full manual, except when I was using my camera to take snap shots of stuff I was selling on eBay, FM, CL, etc.
With digital nowadays, it doesn't cost anything to learn! I am not that old, but I learned with film. My first film body was an EOS 650 and then I quickly snatched up two more (an Elan 7NE and an EOS-3), due to it being film. You were "stuck" at whatever the film was, and so I had three bodies out of convenience, if you will. So one body had Velvia RVP 50, one had Neopan and the other had like Reala. Those were the days (like 2002 or something). .
I say this all the time, but I still have " A Film state of mind". In that, I mean I shoot like I still use film. I pre-vision what I want to convey onto "film", thus it slows up my shooting. I guess all the $$$$ I spent on developing and such (buying a CoolScan IV ED scanner, etc to get it onto the computer) sticks with me.
Point is just go out and shoot. I really up until a year or so ago shot landscapes primarily. I used a Rokinon (Vivitar/Samyang,Bower/etc) 85mm 1.4 and it opened up my eyes to different styles, and thus I am venturing into different subjects. Nothing makes up for experience and trial and errors. Understanding how one setting is in relation to the other will greatly help you!
I agree with most of what you say, except.... I don't get the "Shoot only Full Manual" advice that is heard here and in other places.
If I have spent some $$ on a camera with a computer and a light meter, I figure I'm going to make it do at some of the work. The way I see it, I have a management job, and that is to decide what DoF and/or apparent motion I want to capture (composition) - and to ensure good exposure (quality control). The camera gets to do the grunt work of doing the calculations. It's the back-office.
Generally I use Aperture Priority, and let the camera worry itself over the shutter speed. Though, being the suspicious boss type, I'm always checking over the Camera's work and watching the settings. That way I can step in and make changes if necessary.
I figure I'm thinking through the cycle anyway. I like DoF control, so I generally start with Av. I observe the shutter speed - make sure I'm fast enough if I'm handholding, or perhaps I want to freeze or blur something. (Or if I'm on a tripod can I get away with triggering with a light finger or do I need to go to a timer or cable release).
Then I observe the overall exposure. Do I need to adjust the +/- thingy?
I guess it's the difference between :
Think -> Look -> Think -> Make a Setting -> Push Button (Manual)
Think -> Look -> Adjust if necessary -> Push Button (Av or Tv).
Seems faster my way, and just as accurate. And maybe more accurate if I'm tired. ... but maybe I'm missing something?
I'm really enjoying this whole thread..... :)
With digital nowadays, it doesn't cost anything to learn! I am not that old, but I learned with film. My first film body was an EOS 650 and then I quickly snatched up two more (an Elan 7NE and an EOS-3), due to it being film. You were "stuck" at whatever the film was, and so I had three bodies out of convenience, if you will. So one body had Velvia RVP 50, one had Neopan and the other had like Reala. Those were the days (like 2002 or something). .
I say this all the time, but I still have " A Film state of mind". In that, I mean I shoot like I still use film. I pre-vision what I want to convey onto "film", thus it slows up my shooting. I guess all the $$$$ I spent on developing and such (buying a CoolScan IV ED scanner, etc to get it onto the computer) sticks with me.
Point is just go out and shoot. I really up until a year or so ago shot landscapes primarily. I used a Rokinon (Vivitar/Samyang,Bower/etc) 85mm 1.4 and it opened up my eyes to different styles, and thus I am venturing into different subjects. Nothing makes up for experience and trial and errors. Understanding how one setting is in relation to the other will greatly help you!
I agree with most of what you say, except.... I don't get the "Shoot only Full Manual" advice that is heard here and in other places.
If I have spent some $$ on a camera with a computer and a light meter, I figure I'm going to make it do at some of the work. The way I see it, I have a management job, and that is to decide what DoF and/or apparent motion I want to capture (composition) - and to ensure good exposure (quality control). The camera gets to do the grunt work of doing the calculations. It's the back-office.
Generally I use Aperture Priority, and let the camera worry itself over the shutter speed. Though, being the suspicious boss type, I'm always checking over the Camera's work and watching the settings. That way I can step in and make changes if necessary.
I figure I'm thinking through the cycle anyway. I like DoF control, so I generally start with Av. I observe the shutter speed - make sure I'm fast enough if I'm handholding, or perhaps I want to freeze or blur something. (Or if I'm on a tripod can I get away with triggering with a light finger or do I need to go to a timer or cable release).
Then I observe the overall exposure. Do I need to adjust the +/- thingy?
I guess it's the difference between :
Think -> Look -> Think -> Make a Setting -> Push Button (Manual)
Think -> Look -> Adjust if necessary -> Push Button (Av or Tv).
Seems faster my way, and just as accurate. And maybe more accurate if I'm tired. ... but maybe I'm missing something?
I'm really enjoying this whole thread..... :)
netdog
Oct 27, 01:45 AM
First of all, it isn't $99 unless you insist on paying full price.
Secondly, it is worth every cent. So much more than email, and fantastic for those who own more than one Mac.
Secondly, it is worth every cent. So much more than email, and fantastic for those who own more than one Mac.
GadgetAddict
Aug 19, 10:08 AM
After numerous accusations from all over the world of Facebook violating private privacy rights they now do this...
Eddyisgreat
Apr 12, 12:50 PM
oh happy day!11
mdntcallr
Sep 25, 11:44 PM
hell i think apple created the POD name in popular imagination.
they need to protect the product brand name POD from being brought down in value by companies like PODFITNESS and others, that use their name in it.
Apple needs to protect the brand name. but need to do it nicely.
hard thing to balance. lets hope it goes ok.
they need to protect the product brand name POD from being brought down in value by companies like PODFITNESS and others, that use their name in it.
Apple needs to protect the brand name. but need to do it nicely.
hard thing to balance. lets hope it goes ok.
scaredpoet
Dec 27, 11:29 PM
By the way, the iPhone Blog has something a bit more rational and realistic (http://www.theiphoneblog.com/2009/12/28/iphone-nyc-att-periodically-modifies-promotions-distribution-channels/?utm_source=twitterfeed&utm_medium=twitter&utm_campaign=Feed%3A+TheIphoneBlog+%28The+iPhone+Blog%29):
TechCrunch doesn’t seem to be having too much trouble finding them and simply suggests AT&T’s online system pulls from a different warehouse and seems to be out of stock in the area:
So if you really want to buy an iPhone in New York City, go to an AT&T store, or an Apple Store. Or try Apple’s website. That seems to be taking orders for New York City residents just fine ( I got up to the checkout).
TiPb contacted AT&T PR and got the following, which we’re grateful for given the holidays, the weekend, and the late hour, though it is a tad on the cryptic side:
“We periodically modify our promotions and distribution channels.”
It would appear that a little independent research will show that getting an iPhone in NYC is still very possible.
And, the Consumerist has once again proven in a different story that panicky reporting can be bad (http://consumerist.com/2009/12/next-time-you-fly-prepare-to-be-patted-down-and-computerless.html).
TechCrunch doesn’t seem to be having too much trouble finding them and simply suggests AT&T’s online system pulls from a different warehouse and seems to be out of stock in the area:
So if you really want to buy an iPhone in New York City, go to an AT&T store, or an Apple Store. Or try Apple’s website. That seems to be taking orders for New York City residents just fine ( I got up to the checkout).
TiPb contacted AT&T PR and got the following, which we’re grateful for given the holidays, the weekend, and the late hour, though it is a tad on the cryptic side:
“We periodically modify our promotions and distribution channels.”
It would appear that a little independent research will show that getting an iPhone in NYC is still very possible.
And, the Consumerist has once again proven in a different story that panicky reporting can be bad (http://consumerist.com/2009/12/next-time-you-fly-prepare-to-be-patted-down-and-computerless.html).
No comments:
Post a Comment